Operation Manual

Contents
1. Part Names
2. Basic Operation
3. Menu Operation
1. How to Use Menu
2. How to Use Setup Menu
3. List of Setup Menu
Items
44. How to Use Application
Menu
45. Entering Letters
(Software Keyboard)
4. USB Media
5. Connecting Other
Devices
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
8. Specifications, etc.
You can select a language.
English >>
Français >>
Español >>
D
eutsc
h >
>
＞
＜
Menu Operation
List of Setup Menu Items
Terminal setting (Continue)
INPUT7 audio setting
*1
• Sets the audio input for INPUT 7.
INPUT8 audio setting
*2
• Switches the audio input terminal for INPUT 8.
Digital audio output
*3
• Sets the signal format for digital sound
Menu
item name
Setup
INPUT7 audio
setting
INPUT7-A Uses the INPUT7-A sound.
INPUT7-B Uses the INPUT7-B sound.
INPUT7-C Uses the INPUT7-C sound.
INPUT7-D Uses the INPUT7-D sound.
Audio input terminal Uses the Audio input terminal sound.
INPUT8 audio
setting
HDMI
Switches the audio input terminal for INPUT 8.
Analogue audio input
Digital audio
output
PCM
When connecting a device that does not support AAC / Dolby Digital, set it to
"PCM" (page 5-14). The same sound (Main, sub, M/S) as the program which is being
viewed will be the output.
Bit Stream
To connect an amplifier that supports AAC / Dolby Digital, set it to "Bit Stream". Both
the main and sub sound will be simultaneously output.
NOTE
*1 It is displayed when the input is changed to INPUT7.
*2 It is displayed when the input is changed to INPUT8.
*3 It is dis
p
la
y
ed when the in
p
ut is chan
g
ed to INPUT1,2,3,4
.
3-36
5/27/2020 Sharp operation manual