Operation Manual, User's Manual
Table Of Contents
1-53
BEFORE USING THE MACHINEâ–ºBEFORE USING THE MACHINE
Card Reader Settings
Card Scan Test
Execute the scan test of the card to be used.
Card ID Registration/Change Authority
This setting specifies whether the logged-in user can register/change/delete the card ID information on the machine.
Check System Code only in FeliCa User Area mode
Check the System Code only in FeliCa User Area mode.
Check Facility Code in HID mode
This setting specifies whether or not to check facility code when you use HID mode.
When this setting is enabled, register the facility code (maximum of 128 characters).
Facility Code
Enters the facility code of a HID card. When you tap the [Store] key, the facility code is stored.
Importing from the setup file
When you enter the configuration file name and tap the [Execute] key, the card area settings are read from the
configuration file. If you tap the [Clear] key, all files that match the current search conditions are deleted.