Operation Manual, User's Manual

2-31
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Specifying the image dimensions
1
Perform steps 1 to 2 in Using the preset ratio key (page 2-27).
2
Tap the [by Size] key.
3
Specify the X and Y dimensions of the
image size and those of the output
size.
Check that a paper size suitable for the ratio is selected.
After the settings are completed, tap .
Tap the image size and output size areas, and enter the sizes using the numeric keys.
• If you have entered an incorrect size:
Tap the [C] key on the numeric keys that appears when you tap the entry area, and set to the correct size.
• To cancel all settings:
Tap the [CA] key.
Start
Colour
Start
Preview
2-Sided Copy
Background Adjustment
Change Paper Feed Tray
Paper Select
Change Size/Direction.
Original
Others
Copy Ratio
by Size
The copy ratio is calculated from specified sizes.
Enter the image size and the finished size.
Copy Ratio
Image Finished
Not Input Not Input
0
0
mm mm
Not Input Not Input
mm mm
1
No. of copies
CA
B/W