Operation Manual

4. When you want to reset the time of day, follow the

above example again.

5. If you do not want to set the clock, press the

STOP / CLEAR key once. . 0 will appear on

the display. When the operation of the oven is

finished, . 0 will reappear on the display instead

of the time of day.

6. If you set the clock, energy save mode does not

work.

There are two setting modes: 12 hour clock and 24 hour clock.

Step 1

1. To set the 12 hour clock, press the CLOCK key once as in Step 1.

2. To set the 24 hour clock, press the CLOCK key twice as in Step 2 .

Step 2

Example:

To set the 24 hour clock to 23:35.

2. Input the hours. Press the TIME

keys until the correct hour is

displayed (23).

Check the display.4. Input the minutes (35).

Press the TIME keys.

NOTES:

1. Press the STOP / CLEAR key if you make a

mistake during programming.

2. If the oven is in cooking or timer process and you

wish to know the time of day, press the CLOCK

key. As long as your finger is pressing the key, the

time of day will be displayed.

3. If the electrical power supply to your microwave

oven is interrupted, plug in the oven again, then

open and close the door. The display will show

“. 0”. If this occurs during cooking, the programme

will be erased. The time of day will also be erased.

1. Choose the 24 hour clock

by pressing the CLOCK

key twice.

3. Change from hours to

minutes by pressing the

CLOCK key once.

5. Press the CLOCK key to start

the clock.

x2 x2 x3 x1

x3 x5

SETTING THE CLOCK

R-960N_01-47.indd 10

5/14/08 10:51:56 AM