Specifications
General information
12 ProtoMat 95s/II
3.0 General information
3.1 Scope of supply
1.
One LPKF
ProtoMat
95s/II machine unit with integrated electronic
circuitry
2.
One null modem cable (LPKF
ProtoMat
95s/II control unit
computer)
3.
One set of accessories (adhesive tape, various Allen keys, 5
alignment pins, tweezers, brush, 7 mm box spanner, two red
registration hole strips, syringe containing oil)
4.
One mains cable
5.
Spacer ring press
6.
Pre-assembled hood for the LPKF
ProtoMat
95s/II
7.
This manual
8.
2,95 mm registration hole drill (only for registration drillings)
3.2 Optional accessories
The following accessories are available for the LPKF
ProtoMat
95s/II.
• Vacuum system with fine mesh filter.
The fine mesh filter is particularly essential when handling
materials containing glass fibre, such as FR4 base material.
• Compressor for generating compressed air
• LPKF
AutoSwitch
.
Automatic switch for the vacuum system. This option allows the
vacuum system to be switched on and off by the plotter spindle.
• LPKF
AutoContac
Integrated through-hole plating using a dispenser and a special
conductive paste capable of being soldered.
3.3 Air-borne sound
A continuous sound pressure level of 68-70 dBA is generated at the
workplace.
This measurement is based on the hood being open but without the
vacuum system operating.