Specifications

Safety regulations
10 ProtoMat 95s/II
1.0 Safety regulations
Caution! The user must have read this manual, paying particular
attention to the safety instructions printed in bold, to ensure safe
working with this system.
• It is a general requirement for your safety that you operate
the LPKF ProtoMat 95s/II circuit board plotter in accordance
with the regulations. This entails milling and drilling
permitted materials only.
• Under no circumstances may the limit switches on the hood
be overridden. It must also be ensured that no modifications
have been made to the BoardMaster program.
• Never mill or drill with the AutoContac adaptor fitted. There
is a risk of collision during automatic tool change.
• Always close the hood before starting up. Caution - the hood
flap is not damped.
• Never reach into the machine while it is running.
• Caution - the machine changes the traverse speed
automatically during the process.
• Never operate the control PC simultaneously with work on
the machine.
• Operators with long hair must wear a hair net.
• If you modify the equipment yourself, the safety of the
equipment can no longer be guaranteed and no guarantee
claims can be accepted.
• Please take note that some materials may produce
carcinogenic dust or hazardous gases. Ask your supplier of
the materials.
• Always work with the vacuum system.
• When using chemicals please take note of the safety notes
on the containers or separate safety sheets delivered with
them.
• Keep the workplace tidy.
• Drawings marked with a “hand” symbol indicate
actions which carry an increased risk to fingers and hands.
Caution - risk of crushing.