Specifications

14
Manual
ProtoMat 95s/II
2.10 The hood and pneumatic port
The LPKF ProtoMat 95s/II is normally supplied with the hood pre-assembled. More detailed
information on the hood can be obtained from the relevant assembly instructions.
Caution
Close the flap by the handle only as there is a risk of fingers being crushed at
the sides of the flap.
Secure the flap when open in the catches provided for this purpose.
LPKF ProtoMat 95s/II dust and safety hood
Fastening point for the
water trap with
pressure reducer
Stop catches