Owner`s manual

ManualsBrandsSharp ManualsKitchen AppliancesR-9200

C-1

Source Numbers 80 - 89 and 90 - 99

5975738 BARCOREALITY 9200TCR+ 020798

SOURCE NUMBERS 80 - 89 AND 90 - 99

Projector without any 800 peripheral connected.

The source numbers 80 - 89 and 90 - 99 do not correspond to physical inputs. An additional adjustment file can

be created for these source numbers. This file can contain different settings. The relationship between sources

0 - 9 and 90 - 99 or between 0 - 9 and 80 - 89 is shown in the diagram below.

source input 1

source number 1

source number 81

source number 91

file A

file A'

file A''

source input 2

source number 2

source number 82

source number 92

file B

file B'

file B''

source input 3

source number 3

source number 83

source number 93

file C

file C'

file C''

source input 9

source number 9

source number 89

source number 99

file I

file I'

file I''

Follow the steps below to create a second or a third file for sources 0 to 9 :

1. Select the source between 0 and 9.

2. Select the corresponding source number between 80 and 99 with the digit keys on the RCU.

3. Enter the adjustment mode and load a corresponding file. Edit this file if necessary.

4. Save the file and exit the adjustment mode.

Projector with a 800 peripheral connected.

Source numbers 90 - 99.

The source numbers 90 - 99 do not correspond to physical inputs. An additional adjustment file can be created for

these source numbers (source numbers of the 800 peripheral). This file can contain different settings. The

relationship between sources 0 - 9 of the 800 peripheral and 90 - 99 is shown in the diagram below.