Operator`s manual

86 918496/GP0313

Auxiliary Hydraulics

Auxiliary hydraulics are used for hydraulically-powered attachments. The

auxiliary hydraulic circuit must be connected to hydraulically-powered

attachments before the attachments can be used.

Auxiliary Circuit Pressure Relief

Relieve pressure in the auxiliary hydraulic

circuit before connecting / disconnecting

hydraulically powered attachment hoses.

For the following machines:

• AL 100 Series - Serial Numbers

11480 and Up

• AL 200 (EU) Series - Serial Number

21293 and Up

• AL 300 Series - Serial Numbers

31822 and Up

• AL 400 (EU) Series - Serial Numbers

41374 and Up

• AL 500 Series - Serial Numbers

51590 and Up

Stop the engine, push down and pull up

on the pressure relief control (K, Fig. 53).

Be sure no

one is near

the machine when relieving pressure from the auxiliary hydraulics

circuit. Stored pressure may cause connected hydraulically-

powered attachments to move when the circuit is de-pressurized.

Figure 53 – Auxiliary Hydraulics

Pressure Relief Lever

AL 100 Series

AL 200/300 Series

AL 400/500 Series

WARNING