Operator`s manual

76 918496/GP0313

Slow/Fast Travel Speed Mode Selection

(AL 300, AL 400, AL 500 Series)

Machine stability is affected by machine speed,

especially on rough or hilly terrain, while

carrying heavy loads, and while carrying loads raised above the

height of the wheel axles. Always operate the machine at speeds

appropriate for the conditions, Move the controls smoothly and

gradually. Avoid sudden directional changes while traveling in the

fast-speed mode.

Always use the slow travel speed mode in congested or populated

areas.

To toggle between slow/fast travel speed

modes, press the switch (Z, Fig. 35) and

hold for one second.

Differential Lock Operation

(AL 300, AL 400, AL 500 Series)

Important: Stop the machine before

engaging the differential lock. Do not

engage the differential lock if turning on

smooth, dry pavement. Damage to the axles

may result.

The differential lock can provide increased

traction on loose and slippery surfaces.

Note: The differential lock is engages on

both front and rear axles.

To engage the differential lock, press and

hold the differential lock switch (J, Fig.

36). Release the switch to disengage the

differential lock.

WARNING

Figure 35 – Slow/Fast Speed

Selection Switch

Figure 36 – Differential Lock

Switch