Operator`s manual

56 918496/GP0313
Cab Controls (Cab only)
Cab Environment Controls
To operate the cab heater and air circulation fan:
1. Move lever (C, Fig. 6) rearward to
increase heat; forward to reduce
heat.
2. Turn the fan control (D, Fig. 6)
clockwise to increase circulation
fan speed; counter-clockwise to
decrease circulation fan speed.
Air Conditioning Control (option)
Optional air conditioning is controlled by a knob located on the windshield wiper
control panel. To operate the air conditioning system:
1. Rotate the air conditioning control knob clockwise to turn on the air condi-
tioning system. The knob has three positions, from off at the “0” position, to
full speed at the “3” position.
2. Rotate the air conditioning con-
trol knob counterclockwise to the
“0” position to turn off the air
conditioning system.
Important: Do not operate the air
conditioning and the cab heater at
the same time. Doing so will exceed
the capacity of the electrical system
and discharge the battery.
Figure 6 – Cab Environment
Controls
C
D
OFF
ON
MAXIMUM
Figure 7 – Air Conditioning
Control