Operator`s manual

918496/GP0313 143
When the engine is running, components in the
engine compartment rotate. Before removing
the jumper cables, be sure that no loose clothing can become
caught in the rotating components.
7. After the engine is running, remove the negative jumper cable connected to
the booster machine ground.
Important: DO NOT allow the booster cable ends to touch when removing them.
Arcs and direct short circuits can cause severe damage to the electrical system.
8. Disconnect the jumper cables from the machine with the discharged battery.
9. Remove the positive jumper cable from the booster battery.
10. Close the engine cover and confirm it is latched securely.
11. Allow the machine to run for at least 30 minutes to re-charge the battery.
Remote Battery Terminal
The optional remote battery terminal
allows access to the battery terminals for
jump-starting purposes.
Open the engine hood to access the
remote battery terminal. Remove cap (T,
Fig. 111) for access to the remote
connection for the positive battery
terminal stud. Stud (U) provides a remote
connection to the machine ground.
WARNING
Figure 111 – Optional Remote
Battery Terminal
U
AL 100 Series
AL 500/400/300/200 Series
T
U
T