Operator`s manual

100 918496/GP0313
AL 500, AL 400, AL 300 and AL 200 Series:
5. Connect spreader bar and chains to front and rear lift points as shown (Fig.
68). The spreader bar should be long enough to prevent the chains from rub-
bing on the engine hood and the chains should be long enough to clear the
ROPS structure.
6. Lift the machine so it remains level (Fig. 67 and Fig. 68).
Important: Chains must be routed over the rear bumper to prevent damage to
machine.
Figure 67 – Crane Lifting
AL 500, AL 400, AL 300 and AL 200 Series
A
B
D
C
AL 400/500 Series
A
B
D
C
AL 200/300 Series
A. Chain - rear
B. Lift points - rear (2)
C. Lift points - front (2)
D. Chain - front
E. Spreader bar
A
B
Back