Specifications

C o n f i g u r i n g Y o u r L i f e B o o k 4 0 0 S e r i e s
L i f e B o o k 4 0 0 S e r ie s f r o m F u j i t s u
55
Table 3-2 Options and Defaults for the IDE Adapter Submenu
Parameter Options Default Description
*Sectors/Track: A number between When one of the preset combinations Sets the number of sectors on the hard disk. This field
0 and 63. is selected the value set is displayed but can be changed by incrementing or by typing in the
cannot be changed from the screen. This number followed by the Enter key.
field can only be changed from the screen
when Type: is selected as User.
*Write Precomp: None or a four When one of the preset combinations Sets the amount of write compression to be used
digit number. is selected the value set is displayed but in storing data on the hard disk. This field can be
cannot be changed from the screen. This changed by incrementing or by typing in the number
field can only be changed from the screen followed by the Enter key.
when Type: is selected as User.
*Multi-Sector Disabled; 2;4; 6; 8; 16. When one of the preset combinations Sets the number of sectors allowed in a block transfer.
Transfers: is selected the value set is displayed but
cannot be changed from the screen.Only
when Type selected is User can
this field be set from the screen.
*LBA Mode Control: Enabled; Disabled. When one of the preset combinations Enables or disables Block Addressingin place of
is selected the value set is displayed but Cylinder, Head, Sector addressing.
cannot be changed from the screen. This
field can only be changed from the screen
when Type: is selected as User.