User`s manual

English - 30
Setting up the PC Input
Note : It is available in PC input mode.
Adjusting the Status of PC Screen Automatically
1. Press the MENU button.
2. Press the
▲
or
▼
button to move to
Setup, then press the OK button.
3. Press the
▲
or
▼
button to move to
PC Setup, then press the OK button.
The Auto in Progress is selected.
4. Press the OK button again.
The message Auto Adjustment in Progress... is displayed. The picture
quality and position are automatically adjusted, and the picture returns to
original view about a few seconds later.
Tuning the PC Screen for Improved Quality
5. Press the
▲
or
▼
button to select
Frequency or Phase, then press the
OK button. Press the
◄
or
►
button until you reach the optimal setting,
then press the
BACK button.
Selecting the Position of PC Screen
6. Press the
▲
or
▼
button to move to
PC Position, then press the OK
button.
Select required position by pressing the
▲
/
▼
/
◄
/
▲
buttons, then press the
BACK button.
Resetting the PC Screen Settings
7. Press the
▲
or
▼
button to move to
Reset, then press the OK button.
The message for initializing is displayed.
8. Press the
◄
or
►
button to select
Yes, then press the OK button.
All settings of PC screen are replaced with the factory initial values.
PC Setup
Auto in Progress ►
Frequency
50
Phase
94
PC Position
Reset
Move
OK
Enter
Back
Return
Auto Adjustment in Progress...
PC Setup
Auto in Progress
Frequency
50
Phase
94
PC Position
Reset
Move
OK
Enter
Back
Return
Frequency
50
PC Position
Adjust
Back
Return
Reset
Move
OK
Enter
Back
Return
It will clear PC setup adjustment, and
then return to factory initial value.
Do you want to continue?
Yes No