Instruction manual

3-33
3
ANG
･In this mode, the display “:” following “HA” is replaced with “Σ”
and the number of repeat angles is displayed after “N=”.
･Horizontal angles can be measured up to 1999º59’59”.
･This function will store both RAW and XYZ data (as CP record)
after the foresight point is measured regardless of the “Store DB”
setting.
･While in the repeat angle measurement mode, distance
measurements cannot be taken or recorded.
･Once the HRx is calculated after some repetition shots, the
horizontal angle display will not change until the process is
finished or aborted.