Instruction manual

3-96
3
MENU/4: Data
Pressing the [DSP] key switches the displays in the following order.
ST records
This record includes the “PT”, “HI”, “BS”, and “BS Az”. You can see
its coordinate by pressing the [DSP] key as well.
When a new ST point number/name is assigned in STN/4:Quick Stn.,
the coordinate of the Station will be recorded as (0, 0, 0).
PT:
HA:
VA:
SD:
1st screen
PT:
HT:
CD:
2nd screen
PT:
X:
Y:
Z:
3rd screen
･The third screen is only displayed when the raw data record has
corresponding coordinates available. For this the "Store Data" setting
needs to be set to "Both". Coordinates are never available for F1/F2
records.
･When taking a check shot, if you decide to overwrite an existing
coordinate, the raw data record that created the original coordinate
becomes 'raw data only' and no longer has coordinates available.
ST:
HI:
BS:
Az:
1st screen
2nd screen
PT:
X:
Y:
Z: