Instruction manual

3-86
3
MENU/2: Cogo
2-3) Area & Perimeter
Calculating Area and Perimeter
Press the [3] key in the COGO menu.
Input the first point of the lot and press the
[ENT] key. In the upper right corner of
the screen, there is a counter to show how
many points you have entered.
When a new point name is input, you can
input new coordinates and record it.
If you don’t have to record the point, just
press the [ENT] without PT. It shows XY
coordinate input screen.
Repeat inputting points until you have
defined all the points in the lot. Then,
press the Down arrow key to calculate the
area and perimeter.
Press any key to return to the COGO
menu.
Ｉｎｐｕｔ Ｐｏｉｎｔ ０１
ＰＴ：１００５
■
1
･By default, the system closes the area using the last point and the first
point in the list.
･To obtain the correct result, you must input the point in order of closing
the area with one stroke .
･Area and Perimeter cannot be recorded.
･Maximum 99 points can be input.
Ａｒｅａ：
６５４．５８８２ｍ
２
Ｐｅｒｉｍ：
３４６．００８１ｍ
Ｘ： ５５０８ ．２１１
Ｙ： １７６１ ．５４０
■
1
Ｉｎｐｕｔ Ｐｏｉｎｔ ０４
ＰＴ：
■
Ｐｒｅｓｓ ↓ ｔｏ Ｃａｌｃ
1