TINS-F527WJN1 LC-32LE144E LC-32LE244E LCD COLOUR TELEVISION OPERATION MANUAL SHARP ELECTRONICS EUROPE LTD. 4 Furzeground Way, Stockley Park, Uxbridge, Middlesex, UB11 1EZ, U.K. SHARP CORPORATION http://www.sharp-eu.com LC-32LE144E LC-32LE244E Printed in Poland TINS-F527WJN1 LE144E_244E_Cover_EN_Rev1.
54 408 92 750 698.4 392.9 286 478 508 SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
ENGLISH ENGLISH OPERATION MANUAL • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. Contents Contents .................................................................. 1 Introduction ............................................................. 2 Dear SHARP customer ........................................ 2 Important Safety Precautions ............................... 2 Remote control unit ..................
Introduction Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. Important Safety Precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
ENGLISH Introduction Remote control unit I (POWER) Press to turn the LCD TV on or to enter standby mode. (HOLD) Press to stop the scrolling of pages. The text decoder stops receiving data. (INPUT SOURCE) Press to select an input source. k (REVEAL) Reveal hidden information such as answers to a quiz. 0-9 DIGIT BUTTONS Press to select a TV channel directly. FREEZE Press to freeze a moving image on the screen (only available when your input source is TV).
Introduction TV (Front view) (Standby/On) indicator Remote control sensor TV (Rear view) Power Menu MENU Input Source MENU P Programme (Channel) P Volume C.I. EXT 3 COMPONENT Y PB(CB) PR(CR) USB L-AUDIO-R AV INPUT EXT 2 HDMI 2 HDMI 1 PC DIGITAL AUDIO OUTPUT ANT CAUTION Use a Product with the following thickness for optimal connection to HDMI cable / USB device. HDMI : A 12mm A USB : A B 10mm 7mm A EXT 1 SCART B / OUTPUT AUDIO (L/R) Common Interface slot C.I.
ENGLISH Preparation Supplied accessories P MENU Remote Control (×1) :A TION CAU 12mm B B UT / AUDIO OUTP (L/R) R T (C PR 1 ONEN3 B) PB (C HDMI 2 INPUT Y PC AV T UT DIGIT AUDIO OUTP AL EXT SCAR 1 ANT EXT COMP EXT ) USB :A A L-AUD IO-R HDMI A 10mm 7mm Use fo a optimall owing Product HDMI t connectih cable icknesswith t / USB on fo he to r device. HDMI 2 USB C.I.
Preparation Installation of batteries 1. 2. Open the battery cover. 3. Replace the cover. Insert two R03 (“AAA” size) batteries into remote control. Make sure the (k) and (l) ends are facing correct direction. Using the remote control Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit and sensor may block proper operation.
ENGLISH Quick guide Initial installation overview Follow these steps one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. 2 Power on and run the auto installation Turn on the TV power with a/I. 1 MENU P Preparation C.I. Connect antenna cable to the antenna terminal.
Quick guide 9. Tuning Mode Auto Tuning Tuning Mode ATV and DTV Start Scan OK OK Enter RETURN Back Press to select Tuning Mode, and press to select ATV, DTV or ATV and DTV. 10. Start searching channels to select Start Scan, and press Press OK. Auto Tuning ATV DTV Progress 1 % 0 % Channel: Found 0 0 C3 Station: EXIT Stop NOTE • If you are able to receive broadcasts from more than one region or transmitter you will be prompted to choose via an OSD menu.
ENGLISH Watching TV Daily operation Changing channels Change channels by pressing P button. Turning on the power Turn on the power by pressing the a/I button on the TV. MENU P C.I. EXT 3 COMPONENT Y PB(CB) PR(CR) USB L-AUDIO-R AV INPUT EXT 2 PC DIGITAL AUDIO OUTPUT Channel List HDMI 2 HDMI 1 ANT CAUTION Use a Product with the following thickness for optimal connection to HDMI cable / USB device.
Watching TV Operation without a remote control MENU E TIMER MENU 1. 2. Press to select desired date, and press OK. Press . to select desired channel, and press 3. Press to select programme, and press OK. P MENU Programme Guide $XJ 4 4 6 9 C.I. P EXT 3 COMPONENT Y PB(CB) PR(CR) USB L-AUDIO-R AV INPUT EXT 2 HDMI 2 HDMI 1 PC DIGITAL AUDIO OUTPUT ANT CAUTION Use a Product with the following thickness for optimal connection to HDMI cable / USB device.
ENGLISH Watching TV Teletext Using the MHEG5 application (UK only) What is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available.
Channel Setting Auto Tuning NOTE • You may be prompted to select your local cable operator before running the cable scan mode. Auto Tuning 3. Press to select Scan type, and press to select Quick Scan or Full Scan. 4. Press to select Start Frequency, End Frequency, Modulation, Symbol Rate or Network ID, and use digit buttons on the remote control to define the information or select Auto for tuning. 5.
ENGLISH Channel Setting E Channel Edit Channel Edit allows you to change the channel number or the channel name. 1. Press OK. 2. Press to select an item, then press change the data, and then press OK. to select desired channel and press to DTV Manual Tuning Press MENU. Press to select Setup, and press OK. to select DTV Manual Tuning, and press Press OK. E DTV mode - Antenna 1.
DTV Settings DTV Settings Press MENU. Press to select Setup, and press OK. to select DTV Settings, and press OK. Press NOTE • To view a locked channel, you must enter a password. When you select a locked channel, a password prompt message pops up. Subtitle and Audio Channels Channels 3RViWiRQ 803 804 805 806 807 805 TV 1aPH Rossia 1 Rossia 24 NTV TR. 5 kaPal BiEiJoQ +264 +' 0oYiQJ You can enable subtitles for each TV channel. Subtitles are broadcasted via teletext or DVB-T digital broadcasts.
ENGLISH DTV Settings Parental Some digital broadcasters rate their programmes according to age. You can set TV to display only programmes with age ratings higher than your child’s. This function requires a password. 1. Enter your password to access the Parental menu. 2. Press to set the age rating from age 4~18 or select None to turn this function off or Block All. NOTE • This function is available for programmes with Age Rating information. Local Time Setting Set the current time.
TV Menu Picture C.M.S. Control Press MENU. Press to select Picture, and press OK. Select On to set the C.M.S. Adjustment to be more natural. C.M.S. Adjustment Picture Picture Settings OK C.M.S. Control Off C.M.S. Adjustment DNR Low MPEG NR Low Adjust the brightness of a selected colour using a sixcolour adjustment system (only if the C.M.S. Control is On). DNR Filter and reduce the noise in the picture.
ENGLISH TV Menu Selected item Description Bass Enhancer This function allows you to enjoy bass-enhanced sound. Surround Sound Automatically switch the TV to the best surround sound mode available from a broadcast. (On, Off) AVL (Auto Volume Leveling) Reduce sudden volume changes, for example, during commercials or when switching from one channel to another. (On, Off) Dynamic Range Control Set the control of audio compression for some digital TV programmes.
TV Menu E EXT1 Input You can set the specific type of signal going into SCART terminal. (S-VIDEO, AV) Check the signal output type of the DVD or other equipment connected to the SCART teminal of the TV, referring to manufacturer’s instruction of those devices. Select the correct input signal setting for SCART. NOTE • This option is available only when the input source is SCART. Picture Position For adjusting a picture’s horizontal and vertical position.
ENGLISH TV Menu Features Teletext Press MENU. Press to select Features, and press OK. You can select Teletext language when the TV receives Teletext signal broadcast by a TV network. (Auto, LIST) • See page Teletext. EPG (Electronic Programme Guide) See page EPG (Electronic Programme Guide). Button Control Lock Locks the buttons on the TV except the power switch. (Off) Sleep Timer Sleep Timer switches the TV to standby after a defined period of time. Preferences Press MENU.
TV Menu Wide Mode You can manually select the size of a picture appeared on your screen. Selectable picture size varies with the type of signal received. Press while the Wide Mode menu displays on the screen. • As you toggle down the options, each mode is immediately reflected on the TV. Selected item Description Full For 16:9 squeeze pictures. 4:3 For 4:3 “standard” pictures. A side bar appears on each side.
ENGLISH Connecting a USB device 5. USB function This TV is equipped with a USB1.1 and USB2.0 compatible connector that enables you to view photos, listen to music, and play videos stored on a USB storage device. Press and OK to browse the files or folders. Press EXIT to return to the previous operation / folder. View Photos 1. In the Photo thumbnail browser, press to select a photo or a photo album. 1\1 USB:\ Return MENU P C.I. COMEXT 3 PONE Y PB (C B) AV C.I.
Connecting a USB device USB device compatibility USB 2.0 device USB Memory (Mass Storage class) File system FAT / FAT32 Photo file format JPEG (*.jpg), PNG, bmp Music file format MPEG1 (*.MP3) Bitrate: 32k, 64k, 96k, 128k, 196k, 256k, 320kbps Sampling frequency: 32k, 44.1k, 48kHz WMA (*.WMA, *.ASF) Bitrate: 128k, 196k, 256k, 320kbps Sampling frequency: 8k, 16k, 32k, 44.1k, 48kHz Video file format MPEG1/2 (*.AVI, *.MPG, *.MPEG, *.TS) MPEG4 (*.AVI, *.MP4, *.MKV) H.264 (*.AVI, *.MP4, *.MKV, *.
ENGLISH Connecting a USB device Control panel for photo/music/movie mode operations Icon Photo Music Movie Play/Pause. Description Rewind. Each time you press rewind, the speed will change (2x, 4x, 8x, 16x). – Fast-forward. Each time you press fast-forward, the speed will change (2x, 4x, 8x, 16x). – Play the previous file. Play the next file. Play the slide show On or Off. – – Stop playback and return to the list of files.
Connecting external devices E Before connecting ... YPbPr (Component connection) • Be sure to turn off the TV and any devices before making any connections. Example of connectable devices • Firmly connect a cable to a terminal or terminals. E VCR E DVD E Blu-ray player/recorder • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device.
ENGLISH Connecting external devices Inserting the Smartcard into CA module SCART connection Example of connectable devices E Decoder In order to receive coded digital stations, a Conditional Access module (CA module) and a Smartcard must be inserted into the CI (Common Interface) slot of the TV. E When using the SCART Full SCART, which transmits S-Video, RGB and CVBS in, and CVBS tuner out. Decoder The CA module and the Smartcard are not supplied accessories.
Connecting external devices Connecting a PC Supported display resolutions Digital connection HDMI cable HDMI PC DVI-HDMI cable DVI HDMI HDMI 1 or HDMI 2 HDMI 2 MENU P C.I. EXT 3 COMPONENT Y PB(CB) PR(CR) USB L-AUDIO-R AV INPUT EXT 2 HDMI 2 HDMI 1 PC DIGITAL AUDIO OUTPUT ANT CAUTION Use a Product with the following thickness for optimal connection to HDMI cable / USB device.
ENGLISH Appendix Troubleshooting Problem Possible Solution No picture 1. Connect power cord correctly. 2. Turn on power. 3. Connect signal cable correctly. 4. Press any button on the LCD TV. Abnormal colours Twisted picture Connect signal cable correctly. 1. Connect signal cable correctly. 2. Please use compatible signal. Picture too dark Adjust brightness and contrast. Audio only, no images 1.
Appendix Specification 32” LCD COLOUR TV Model: LC-32LE144E Item LCD screen size 32” diagonal Number of dots 3,147,264 dots (1366 x 768 x 3 dots) Video Colour System TV-Standard TV Function Receiving Channel CCIR (B/G, I, D/K, L/L’) Digital DVB-T, DVB-C VHF/UHF ATV: IRA-E69, DVB-T: E5-E69 CATV S-band, S1–S41ch TV-Tuning System Auto Preset 1599 ch, Auto Label, Auto Sort Stereo/Bilingual NICAM/A2 5Wx2 Speaker 33 x 140 x 36 mm Side 6,220,800 dots (1920 x 1080 x 3 dots) PAL/SECAM/NTSC 4.
ENGLISH Appendix Environmental specifications Item *1 On-Mode (W) 38W *2 Standby-Mode (W) 0.15W *3 Annual Energy Consumption (kWh) 55kWh *1 Measured according to EN62087 : 2009. *2 Measured according to EN62301 : 2005. *3 Annual energy consumption is calculated on the basis of the On-Mode (Standard) power consumption, watching TV 4 hours a day, 365 days a year. NOTE • The power consumption of On-Mode varies depending on the images the TV displays.
Appendix Trademarks • HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • The “HD TV” Logo is a trademark of DIGITALEUROPE. • The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE. • The DVB logo is the registered trademark of the Digital Video Broadcasting - DVB - project. • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
ENGLISH A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Attention: Your product is marked with this symbol.