User Manual

36
04/6/8
QT-V5E_UK_4.fm
9HX80432100003
QT-V5E
Advanced Features
- Connecting other equipment -
Connecting other equipment
" Digital connection to a digital audio
decoder, etc.
" Headphones
! Before plugging in or unplugging the headphones, reduce the volume.
! Be sure your headphones have a 3.5 mm diameter plug and impedance between
16 and 50 ohms. The recommended impedance is 32 ohms.
! Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME control.
! Do not plug in or unplug headphones whilst recording. The sound may skip.
Caution:
Turn off all equipment before making this connection.
Selecting a sound signal type
When connecting other equipment to the digital audio
output, adjust the audio output setting accordingly (see
page 31).
SPDIF/RAW:
Choose this when connecting the unit to a Dolby Digital
(5.1ch) decoder or DTS (5.1ch) decoder. When playing
a DVD recorded in Dolby Digital or DTS, bitstream out-
put allows you to enjoy the 5.1ch surround sound.
SPDIF/PCM:
Choose this for PCM output. When playing a DVD re-
corded in Dolby Digital, the output converts to 2 channel
PCM. When a DVD recorded in DTS is played back, sig-
nals are sent in bitstream.
Audio signal
Optical digital cable
(commercially available)
To the optical
digital audio input socket
Digital audio decoder, etc.
-- AUDIO PAGE --
SET SPDIF OUTPUT
LPCM OUTPUT
DYNAMIC
MAIN PAGE
SPDIF OUPUT
SPDIF/PCM
SPDIF/RAW