User Manual

04/6/8

QT-V5E_UK_4.fm

9HX80432100003

QT-V5E

Radio Operation

- Listening to the radio -

Listening to the radio

Aerial adjustment

For FM broadcasts, raise and extend the telescopic rod aerial, then adjust the posi-

tion and length for the best reception. For AM, simply move or rotate the unit for the

best sound (the telescopic rod aerial does not affect the reception).

" Tuning

Notes:

! When radio interference occurs, auto scan tuning may stop automatically at that

point.

! Auto scan tuning will skip weak signal stations.

! To stop the auto tuning, press the TUNING or ( or ) button again.

When the FM stereo mode is selected:

FM AM

1 Press the ON/STAND-BY switch on the main unit to turn the power

on.

2 Press the TUNER/BAND button repeatedly to select the desired

frequency band (FM or AM).

FM stereo mode FM monaural mode AM mode

3 Press the or button to tune in to the desired station.

Manual tuning:

Press the TUNING or ( or ) button as many times as required to tune

in to the desired station.

Auto tuning:

When the TUNING or ( or ) button is pressed for more than 0.5 sec-

onds, scanning starts automatically and the tuner stops at the first receivable

broadcast station.

! "STEREO" will appear when an FM broadcast is in stereo. FM stereo receiving

indicator

! If the FM reception is weak, press the TUNER/BAND button to select the FM mon-

aural mode. The reception changes to mono, and the sound becomes clearer.

Disappear