Specifications

E-19
ENGLISH
QT-UH5H
Tape Playback
Listening to a cassette tape
 Cassette Tape
To interrupt playback:
Press the PAUSE button during playback.
Press the PAUSE button again to resume playback.
To stop playback:
Press the STOP/EJECT / button.
Precautions:
 Be sure not to press the PLAY and REWIND buttons
simultaneously, or the tape will become damaged.
 Before changing from one tape operation to another, press the
STOP/EJECT / button.
 Do not press the PAUSE button whilst the fast forward or rewind
operations are in progress. The F.FWD or REWIND
button will not be released when the tape end is reached. Once
this occurs, press the STOP/EJECT / button.
Notes:
 Tape play button will automatically released when the end of the
tape has been reached.
 Fast forward or rewind button cannot automatically released when
the end of the tape has been reached. Make sure to press the
STOP/EJECT / button when the end of the tape has been
reached.
Before playback:
 For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not
recommended.)
 Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
 Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
PAUSESTOP/EJECTF.FWDREWINDPLAYRECORD
TAPE
TAPE
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TAPE button.
3 Open the cassette compartment by pushing the STOP/
EJECT / button.
4 Load a cassette into the cassette compartment with the
side to be played facing up.
5 Press the PLAY button.
6 To advance the tape, press the STOP/EJECT / button,
then press the F.FWD button. To rewind, press the
STOP/EJECT / button, then press the REWIND but-
ton.
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals