Projector Remote Control setup guide

computer, either PROJ1/CPU, PR0J2/CPU, or BOTH). If needed, you can also
use the Switcher to output sound from a computer.
Figure C
Switcher
CPUl CPU2 VCR1 VCR2 LDP1
Power
Control
I/O
PROJ1 PROJ2 PROJ1 PROJ2
CPU CPU VIDEO VIDEO
Audio
output
Enter Preset View Esc RGBS Audio
3.1 Power should be ON (button lit).
3.2 Deselect all buttons under the labels CONTROL and I/O (lights above
buttons should be OFF).
3.3 Under the label I/O, Select the button RGBS (light should come on).
3.4 Select button CPU1 or CPU2 depending on which wall jack the
computer is connected to (red light should come on).
3.5 If any green lights come on elsewhere on the switcher, deselect those
buttons.
3.6 Select button above label for projector output to be used for computer
image projection: (Proji CPU or Proj2 CPU).
• PROJ1 CPU button is for the projector nearest the classroom door.
• PROJ2 CPU button is for the projector nearest the windows.
15