Operation Manual

>>
<<
Using LINK Operation
Controlling HDMI Equipment Using LINK Operation
What's LINK Operation?
Using the HDMI CEC (Consumer Electronics Control) protocol, with LINK Operation you can
interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD).
LINK Operation allows you to operate the HDMI-connected equipment with one remote control.
NOTE
For connecting the Monitor to LINK-compatible equipment, use commercially available cables.
Point the remote control toward the Monitor, not to connected HDMI equipment.
Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMI-
certified cable.
Up to 3 pieces of HDMI recording equipment and one AV amplifier can be connected using this
system.
These operations affect the HDMI equipment selected as the current input source. If the
equipment does not operate, turn on the equipment and select the appropriate input source using
INPUT.
The LINK feature may not operate properly when an HDMI splitter or AV selector unit is used.
These devices may cause interruptions to the image and/or sound.
Connected LINK-compatible devices can be operated without changing the settings of the remote
control unit.
The
OPTION button will function only when LINK Operation is used.
Control the LINK-compatible audio system
Set the volume of LINK-compatible audio system.
NOTE
The steps in "HDMI CEC Link" on
page 6-2 need to be completed beforehand.
Refer to this operation manual and the operation manual of the LINK device to be used with this
Monitor.
Buttons for playing mode
Buttons Description
/ / / Select a desired item
ENTER Activate the selected function
A (red) Stop
B (green) Previous chapter
C (blue) Play
D (yellow) Next chapter
RETURN Go back to the previous page
EXIT Exit from the page
ENG 6-1