Operation Manual

>>
<<
On-Screen Display Menu
Example
Information
NOTE
For operating the on-screen display menu,
see page 4-3.
Identification
The current version of the Monitor software is displayed.
Software Update
This is used to upgrade the system software to enhance the
Monitor functions.
1 Press MENU to display the MENU screen, and then press
/ to select "Information".
2 Press / to select "Software Update", and then press
ENTER.
3 Press / to select "Manual Update" or "Auto Update
Setting", and then press ENTER.
The operations thereafter vary depending on the setting.
Auto Update Setting
When the Monitor is on, or when an Internet application is
being accessed, this function enables the Monitor to connect
to the network and check for updates automatically.
When an update is available, a message is displayed.
Press / to select "Yes", and then press ENTER to display
the download screen.
(See page 4-10.)
NOTE
This function does not work when a broadband connection
or Internet Setup is not available.
A message may also be displayed when an application is
running.The message varies depending on the application.
Manual Update
Select the method for manually updating the software.
USB Update: Updates the software using a USB memory
device containing the update file. (See "Updating the
Software with a USB Memory Device".)
Network Update: Downloads the update file via the network
and then updates the software.
(See page 4-10.)
NOTE
A broadband connection and Internet Setup are required to
update the software using the network.
(See page 8-1.)
It may take time to access and download the update
depending on the Internet connection and other factors.
ENG 4-8