Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- System Requirements
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Preparing the Remote Control Unit
- Mounting a web camera
- Attaching the wireless adapter
- Turning Power On/Off
- Touch Pen
- Touch action
- Basic Operation
- Whiteboard
- Bytello Share
- PDF Viewer
- File Explorer
- Web Browser
- Updating the Software (Update)
- Common Settings Menu
- Administrator Settings Menu
- Reset/Functional Restriction Setting (FUNCTION Menu)
- Controlling the Monitor with a computer (RS-232C)
- Troubleshooting
- Specifications
- Intellectual Property Rights and Other Matters
- Mounting Precautions (For SHARP dealers and service engineers)
43
E
n
Screen
H Position (D-SUB)
Adjust the horizontal position of the image.
V Position (D-SUB)
Adjust the vertical position of the image.
Clock (D-SUB)
Adjusts frequency for sampling clock for applicable video. Adjust when there is flickering in the form of vertical stripes.
When using the adjustment pattern (see page 44), make adjustments so that no vertical stripe noise appears in it.
Phase (D-SUB)
Adjusts sampling clock phase for applicable video. Useful when small characters appear with low contrast and/or there are
flickers at corners. When using the adjustment pattern (see page 44), make adjustments so that no horizontal stripe noise
appears in it.
* Adjustments to “Phase” should be made only after “Clock” has been correctly set.
AUTO (D-SUB)
The “Clock”, “Phase”, “H Position”, and “V Position” are automatically adjusted.
Executed when “AUTO” is selected. Use this automatic adjustment when you use the D-SUB to display a computer screen for
the first time or when you change the setting of the computer. (See page 44.)
Size (HDMI/D-SUB/USB-C/OPS)
Changes the screen size. (See page 26.)
RESET
Resets the values of the Screen menu items to the factory default settings.
n
Picture
Color Mode (HDMI/D-SUB/USB-C/OPS)
Selects color mode for the screen.
Black Level (HDMI/D-SUB/USB-C/OPS)
Adjusts the entire brightness of the video signals. You can set this when the “Color Mode” is set to “Custom”.
Contrast (HDMI/D-SUB/USB-C/OPS)
Adjusts the difference between the bright and dark portions of the image. You can set this when the “Color Mode” is set to
“Custom”.
White Balance
Selects the white balance.
RESET
Resets the values of the Picture menu items to the factory default settings.
Common Settings Menu