Setup Manual

ENGLISH

Turning Power On/O󰀨

Turning power on/o󰀨

Press the POWER button to turn the power ON/OFF.

You can also turn the power ON/OFF by pressing the

MONITOR ON button/MONITOR OFF button on the remote

control unit.

[Rear view] [Front view]

POWER button

Power LED

Status Status of the monitor

Green lit Power on

Orange lit Power o󰀨 (Standby state*)

Green ashing Input signal waiting state

* Standby mode when POWER SAVE MODE is set to ON.

Networked standby mode when POWER SAVE MODE is

set to OFF. Networked standby mode allows the monitor to

be turned on via network (LAN, RS-232C, and HDMI CEC).

• Setting the SCHEDULE ashes the power LED alternately

in red and orange in standby state.

Caution

• Turn on the monitor rst before turning on the computer or

playback device.

• When switching the main power switch or the POWER

button o󰀨 and back on, always wait for at least 5 seconds.

A short interval may result in a malfunction.

Turning on the main power

Main power switch

O󰀨 mode, when main power is o󰀨.

Caution

• The main power must be turned on/o󰀨 with the main power

switch. Do not connect/disconnect the power cord or turn

the breaker on/o󰀨 while the main power switch is on.

•

For a complete electrical disconnection, pull out the main plug.