Operation Manual, User's Manual

5-110
SCANNER/INTERNET FAX►OTHER FUNCTIONS
ELIMINATING BLANK PAGES FROM A TRANSMISSION
(BLANK PAGE SKIP)
If the scanned original contains blank pages, this function skips them to send only non-blank pages.
The machine detects blank pages, enabling you to skip useless blank sheets without checking an original.
• If an original of which one side is blank is scanned, blank pages are skipped for 2-sided sending.
• In a broadcast transmission to destinations including fax and Internet fax destinations, this function is applied to scan
mode destinations only.
• Depending on the original, some pages that are not blank may be detected as blank pages and thus not being sent, and
some pages that are blank may not be detected as blank and thus sent.
• This function cannot be used in Internet fax mode.
•
If the [Send Same Image as Fax Address] key is tapped, this function is cancelled if a fax address is specified for the destination.
To display the blank page skip confirmation message:
Select [System Settings] → [Common Settings] → [Device Control] → [Condition Settings] → [Display Blank Page Skip
Confirmation Message].
1
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER
(page 1-116)
► DOCUMENT GLASS (page 1-119)
2
Tap the mode display to switch to the initial screen of each mode.
► CHANGING MODES (page 1-15)
3
Specify the destination.
► RETRIEVING A DESTINATION FROM AN ADDRESS BOOK (page 5-15)
► VIEWING A LIST OF THE SELECTED DESTINATIONS (page 5-18)
► USING A SEARCH NUMBER TO RETRIEVE A DESTINATION (page 5-19)
► ENTERING AN ADDRESS MANUALLY (page 5-20)
► SPECIFYING A NETWORK FOLDER (page 5-21)
► RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK (page 5-23)
► USING A TRANSMISSION LOG TO RESEND (page 5-25)
Blank page
Do not transmit
blank pages.
Transmission