PN-E471R/E421 Setup-Guide GB

E
22
RS-232C command table
How to read the command table
Command: Command eld (See page 18.)
Direction: W When the “Parameter” is set in the parameter eld (see page 18), the command functions as described
under “Control/Response Contents”.
R The returned value indicated under “Reply” can be obtained by setting “????”, “
?” or “???+”
(repeater control) in the parameter eld (see page 18).
Parameter: Parameter eld (See page 18.)
Reply: Response (Returned value)
*1: “●” indicates a command which can be used in power standby mode regardless of the STANDBY MODE
setting.
“○” indicates command which can be used in power standby mode when STANDBY MODE is set to
STANDARD. (It cannot be used in the power standby mode when LOW POWER is selected.)
“–” indicates a command which cannot be used in power standby mode.
*2: PN-ZB01 (optional) limitations
(A) When PN-ZB01 (optional) is not attached, (B) When PN-ZB01 (optional) is attached.
○ : The command can be used.
- : Error (ERR)
Power control/Input mode selection
Function Command Direction Parameter Reply Control/Response contents *1
*2
(A) (B)
POWER CONTROL POWR W 0 Switches to standby mode.
● ○ ○
1 Returns from standby mode.
R 0 Standby mode
1 Normal mode
2 Input signal waiting mode
INPUT MODE SELECTION INPS W 0 Toggle change for input mode. Terminals not selected in INPUT SELECT
cannot be selected.
●
○ ○
1 PC DVI-D
“ERR” when AV DVI-D is selected for DVI of INPUT SELECT.
-
○
2 PC D-SUB
○ ○
3 AV COMPONENT
“ERR” when PC RGB is selected for BNC of INPUT SELECT.
-
○
4 AV VIDEO -
○
6 PC RGB
“ERR” when AV COMPONENT is selected for BNC of INPUT SELECT.
-
○
7 AV DVI-D
“ERR” when PC DVI-D is selected for DVI of INPUT SELECT.
-
○
8 AV S-VIDEO -
○
9 AV HDMI
“ERR” when PC HDMI is selected for HDMI of INPUT SELECT.
○ ○
10 PC HDMI
“ERR” when AV HDMI is selected for HDMI of INPUT SELECT.
○ ○
R 1 PC DVI-D
● ○ ○
2 PC D-SUB
3 AV COMPONENT
4 AV VIDEO
6 PC RGB
7 AV DVI-D
8 AV S-VIDEO
9 AV HDMI
10 PC HDMI
SCREEN menu
Function Command Direction Parameter Reply Control/Response contents *1
*2
(A) (B)
AUTO ASNC W 1 When the input mode is PC D-SUB, PC RGB.
-
○ ○
CLOCK CLCK WR 0-1200 0-1200 When the input mode is PC D-SUB, PC RGB.
Varies depending on the signal.
PHASE PHSE WR 0-63 0-63 When the input mode is PC D-SUB, PC RGB.
POSITIONING POSITION OF
THE LONGEST
DIRECTION
HPOS WR 0-100 0-100 0-800 on PC D-SUB, PC RGB.
Varies depending on the signal.
POSITION OF
THE SHORTEST
DIRECTION
VPOS WR 0-100 0-100 0-200 on PC D-SUB, PC RGB.
Varies depending on the signal.
SIZE POSITION OF
THE LONGEST
DIRECTION
HSIZ WR 0-100 0-100
POSITION OF
THE SHORTEST
DIRECTION
VSIZ WR 0-100 0-100
RESOLUTION
LONGEST
DIRECTION
RESOLUTION
HRES WR 300-1920 300-1920 When the input mode is PC D-SUB, PC RGB.
Only even numbers are valid for parameters.
Varies depending on the signal.
SHORTEST
DIRECTION
RESOLUTION
VRES WR 200-1200 200-1200
RESET ARST W 1
Controlling the Monitor with a PC (RS-232C)