Operation Manual, User's Manual

1-5
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
(20) Finisher (large stacker)*
This staples paper. A punch module can also be installed
to punch holes in output paper.
► FINISHER (LARGE STACKER) (page 1-139)
(21) Saddle stitch finisher (large stacker)*
This staples and folds paper. A punch module can also
be installed to punch holes in output paper. You can also
perform stapling manually.
► SADDLE STITCH FINISHER (LARGE STACKER)
(page 1-151)
(22) Punch module (MX-PN13A, MX-PN13B, MX-PN13C,
MX-PN13D)*
This punches and outputs paper.
(23) Inserter*
Covers and insertion sheets to be inserted into printed
sheets can be loaded.
Using the manual finishing function, you can directly feed
paper into the finisher or saddle stitch finisher to staple,
punch or fold the paper.
(24) Bypass tray*
Use this tray to feed paper manually.
When loading paper larger than A4R or 8-1/2" × 11"R,
pull out the extension guide.
► LOADING PAPER INTO THE BYPASS TRAY (page
1-112)
(25) Trimming module*
This trims the excess of saddle-stitched output.
(26) Folding unit*
This folds and outputs paper.
(27) Curl correction unit*
This punches and outputs paper.
(28) Paper pass unit*
This feeds paper to the machine.
(29) Large capacity trays*
Store paper in this tray. Up to 2500 sheets can be stored
in each tray.
► LOADING PAPER IN THE LARGE CAPACITY
TRAYS (page 1-107)
*Optional
(25) (26) (27) (28) (29)
(23)(20) (21) (24)(22)