Operation Manual WIRELESS CONTROLLER
Table Of Contents
33
E
n
Saving the screen in whiteboard as an image
The handwritten data in Direct Drawing mode can be saved as an image le (JPEG) in a USB ash drive connected to the
wireless controller.
1. Connect the USB ash drive to the wireless controller.
2. Touch “Save” ( ) on the toolbar.
The le is saved with the le name “B0000001.jpg” in the “Annotation” folder of the USB ash drive.
(The number in the le name is successively incremented up to 9999999, after which it returns to 0000001.)
Caution
• Set the correct date and time in the monitor. (See operation manual.)
The monitor date and time is used for the le time stamp.
n
Displaying a saved image
Caution
• If data already exists in Direct Drawing mode, the original data will be lost when the new image is displayed.
1. Connect the USB ash drive to the wireless controller. (See the description above.)
2. Touch “Open” (
) on the toolbar.
3. Touch the image to be displayed.