Operation Manual WIRELESS CONTROLLER

13
E
2. Windows: Double-click “SHMirrorOp_Win.exe” in the Autoplay screen.
If the Autoplay screen does not appear, open the wireless token and double-click “SHMirrorOp_Win.exe”.
Mac: Open the wireless token and double-click “SHMirrorOp_Mac.app”.
The connection software starts.
3. Click “ ”, select the wireless controller to be connected, and click “CONNECT”.
The host name of the wireless controller is shown in the home screen of Wireless mode.
4. Enter the passcode and click “OK”.
The passcode is shown in the home screen of Wireless mode.
The computer connects to the wireless controller.
n
Starting from the installed/downloaded software
1. Double-click “MirrorOp for SHARP”.
The connection software starts.
2. Click “ ”, select the wireless controller to be connected, and click “CONNECT”.
The host name of the wireless controller is shown in the home screen of Wireless mode.
3. Enter the passcode and click “OK”.
The passcode is shown in the home screen of Wireless mode.
The computer connects to the wireless controller.
TIPS
• The passcode changes for security.
You can change the settings to make the passcode permanent, or connect without entering the passcode. (See page 27.)