Operation Manual

13
E
Connecting Peripheral Equipment
7. Audio 1 input terminal
8. Audio 2 input terminal
• Useanaudiocablewithoutresistance.
• Settheaudioinputterminaltobeusedineachinput
modeinAUDIOSELECTontheSETUPmenu.
9. DisplayPort output terminal
• Thescreendisplayedonthemonitorandtheaudiooutput
fromthemonitorcanbeoutputtoanexternaldevice.
• UseacommerciallyavailableDisplayPortcable
(conformingtotheDisplayPortstandard).
• OutputtingHDCP-encryptedvideorequiresanexternal
devicewhichsupportsHDCP.
10. Audio output terminal
• Theoutputsoundvariesdependingontheinputmode.
• Thevolumeoftheoutputsoundcanbexedbysetting
AUDIOOUTPUTofAUDIOOPTIONontheSETUP
menu.
• Itisnotpossibletocontrolthesoundoutputfromthe
audiooutputterminalswiththeAUDIOmenu.
11. Touch pen adapter port
• Connectthetouchpenadapter(supplied).(Seepage20.)
12. USB 1 port (for touch panel)
• Tousethetouchpanelwiththecomputerconnectedto
thebottom,connectthetouchpaneltothecomputerwith
theUSBcable.
(Factorysetting.CanbechangedinTOUCHINPUT
SELECTontheSETUPmenu.)
13. USB 2 port (for touch panel)
• Tousethetouchpanelwiththecomputerconnectedto
theside,connecttothecomputerwiththeUSBcable.
(Factorysetting.CanbechangedinTOUCHINPUT
SELECTintheSETUPmenu.)
14. RS-232C input terminal
• Themonitorcanbeconnectedtoacomputerusingthe
RS-232Cconversioncable(supplied)andacommercially
availableRS-232straightcabletocontrolthemonitor
fromthecomputer.
15. LAN terminal
• Youcancontrolthemonitorfromacomputeronanetwork
byconnectingacommerciallyavailableLANcable
betweenthisterminalandanetwork.
16. External speaker terminals
• Touseexternalspeakers,setSPEAKERSELECTto
EXTERNALinAUDIOOPTIONontheSETUPmenu.
• Besuretouseexternalspeakerswithanimpedanceof6Ω
orgreaterandaratedinputofatleast10W.
12
 1.Whilepushingthetab,insertthetipofthecable.
 2.Releasethetab.
TIPS
• Besuretoconnectthe+and-terminalsandtheleftand
rightspeakersproperly.
• Avoidshortcircuitingthe+and-terminals.
• WhenSPEAKERSELECTissettoEXTERNAL,the
internalspeakersaredisabled.
Wireless controller terminals
Forinformationonthewirelesscontroller,seetheWireless
ControllerOperationManual.
17. USB port
• ConnecttheUSBashdrivethatwillbeusedwiththe
wirelesscontroller.
18. LAN terminal
• AcommerciallyavailableLANcablecanbeusedto
connectthewirelesscontrollertothenetworkwhilein
use.
19. Wireless adapter port
• Connectthewirelessadapter(supplied).(Seepage17.)