Operation Manual Touch pen Management Tool

5
E
Showing touch panel / touch pen information
This software starts automatically.
You can view information on the operation mode being set and active pen being used.
1. Click the Touch pen Management Tool icon (
) on the taskbar.
Touch Panel Device: Shows the connected monitor.
Touch Panel Settings: Shows the current touch operation mode. To change the touch operation mode, click this part. (See
page 6.)
Touch Pen Settings: Shows information on registered active pens (registration number, connection status, signal strength,
battery level).
You can click an active pen to change its settings. (See page 7.)
To register a new active pen, click “Touch pen registration”. (See page 10.)
 VersionInformation: Showsthemodelnameandrmwareinformationoftheconnectedmonitor,andversionofthis
software.
Exit tool: Exit this software.
TIPS
• If an active pen is not used for 1 minute, it will enter sleep mode.
When the active pen is used, it will automatically wake.
• When an active pen is in sleep mode, the battery level and signal strength will not be shown correctly.
After the pen wakes, it will take time for the battery level and signal strength to be shown correctly.
• Whenanactivepenisinsleepmode,theactivepensettingscannotbecongured.
• Itmaynotbepossibletoconguretheactivepensettingswhilecontinuouslypressingthepentiporfunctionbuttons.