Projector User Manual

53
Appendix
Cleaning the Dust Filters
• The dust filters should be cleaned every 100
hours of use. Clean the filters more often when
the projector is used in a dusty or smoky
location.
Press ST ANDBY/ON on the projec-
tor to put the projector into standby
mode.
•Wait until the cooling fan stops.
• Disconnect the power cord and unplug
the power cord from the AC socket.
Remove the filter holders.
•Turn the projector over. To remove the fil-
ter holders, press in the tabs while lifting
up.
Clean the dust off the dust filters
and the holders with a hand
broom.
Info
1
2
3
Cleaning and Replacing the Dust Filters
AC socket
STANDBY/ON button