Data Projector Operation Manual

-12
43
MENU button
For displaying adjustment
and setting screens.
44
35
AUTO SYNC button
For automatically adjusting
images when connected to
a computer.
ENTER button
For setting items selected
or adjusted on the menu.
32
KEYSTONE button
For entering the Keystone
Correction mode.
30
STANDBY/ON button
For turning the power on and
putting the projector into
standby mode.
15
Remote control
sensor
43
Adjustment buttons
('/"/\/|)
For selecting and adjusting
on-screen items.
51
Speaker
33
Focus ring
For adjusting the focus.
33
Zoom knob
For enlarging/
reducing the picture.
Air filter/Intake vent
(on the bottom of the projector)
Push both sides of the lens cap to
attach or remove.
RETURN button
For returning to the previous
display.
34
INPUT buttons
For switching input mode.
34
Volume buttons
For adjusting the speaker
sound level.
59
Temperature warning
indicator
30·59
Lamp indicator
30·59
Power indicator
31
Height Adjustment
button
31
Height Adjustment
button
31
Tilt dial
31
Adjustment foot
Adjustment foot
ECO+QUIET button
For lowering the noise of the
cooling fan and extending the
lamp life.
35
43
56·57
31
Projector
Part Names and Functions
Numbers in refer to the main pages in this operation manual where the topic is explained.
Top View
Front View
Attaching the lens cap
After putting the lens cap strap on the lens
cap, pass the other end of the strap
through the hole on the front side of the
projector, next to the lens, as shown in
the illustration.