User Manual

15-130
Setting the Handset
Setting the Vibration
You can set the vibration for incoming calls regardless of
the ringer volume and tone settings.
1 At the main menu, select in the following order:
“Settings” → “Profiles” → the profile you wish to
set and press C [Options] → “Personalise.”
2 Press a or b to highlight “Vibration” and press
B.
3 Press a or b to highlight “Enable,” ”Disable,” or
“Link to sound” and press B.
Setting the Keypad Tones
You can set and change the tone of the keypad sound that
you hear each time you press a key. In the following
settings you can select the volume level, the melody to be
used, and the duration.
1 At the main menu, select in the following order:
“Settings” → “Profiles” → the profile you wish to
set and press C [Options] → “Personalise.”
2 Press a or b to highlight “Keypad tones” and
press B.
3 Press a or b to highlight “On” or ”Off” and
press B.
If you select “Off,” the screen returns to step 1.
If you select “On,” follow the steps below.
4 Press a or b to highlight “Volume” and press
B.
5 Press a or b to highlight “High,” “Middle,” or
“Low” to adjust the volume and press B.
6 Press a or b to highlight “Tone” and press B.
7 Press a or b to highlight “More sounds,” “My
sounds,” or “Tone” and press B.
When “Link to sound” is selected in step 3,
melodies are synchronised with the vibration
for the ringtone. However, this function may not
work depending on the melody.
When you select “Enable” or “Link to sound” in
step 3, “ ” is displayed on the standby
screen.