Operation Manual, User's Manual

2-34
COPIER►BASIC PROCEDURE FOR MAKING COPIES
MAKING COPIES USING THE BYPASS TRAY
MAKING COPIES USING THE BYPASS TRAY
In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, tab paper, and
other special media.
For detailed information on paper that can be loaded into the bypass tray, see "APPLICABLE PAPER TYPES (page 1-95)".
For precautions on loading paper into the bypass tray, see "LOADING PAPER INTO THE BYPASS TRAY
(page 1-105)".
Prohibit feeding of paper from the bypass tray when performing duplex copy.
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Disabling of Bypass-Tray
in Duplex Copy].
Disables the use of the bypass tray when making 2-sided copies.
The bypass tray is often used to feed label sheets, transparency film, and other special media for which 2-sided copying is
prohibited. If a sheet of one of these special media enters the reversing unit, a misfeed or damage to the unit may result. If
special media for which 2-sided copying is prohibited is often used, it is recommended that you enable this setting.
1
Load paper into the bypass tray.
► LOADING PAPER INTO THE BYPASS TRAY (page 1-105)
2
Tap the [Paper Select] key, and tap the bypass tray key.
Each tray key displays the size and type of the loaded paper.
► SELECTING THE PAPER TRAY FOR COPYING
(page 2-12)
3
To select more detailed settings, tap the [Detail] key to switch to normal
mode.
► CHANGING MODES (page 1-15)
4
Tap the [Paper Select] key.
5
Tap the [Type and Size] key, and select
the size and type of the paper.
► SPECIFYING A TYPE AND SIZE OF PAPER LOADED
ON BYPASS TRAY (page 2-35)
6
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER
(page 1-116)
► DOCUMENT GLASS (page 1-119)
Bypass Tray : Plain (60 - 79g/m2)
A3
B4
Bypass Tray : Plain (60 - 79g/m2)
Preview
Paper Select
Others
No. of copies
Shift Position to Have Margin
Copy Ratio
Enlarge/Reduce Copy
Margin Shift
Change Size/Direction.
Original
2-Sided Copy
Change Type and Size of
Tray Specified Currently
Start
1
Plain 1
Paper Tray
A4
B5
B4
A3
Plain 1
Plain 1
Plain 1
1
2
3
4
Type and Size
Plain 1
A4
Bypass Tray
CA
Bypass Tray : Plain 1 (60 - 89g/m
2
)