Operation Manual, User's Manual

2-62
COPIER►BASIC PROCEDURE FOR MAKING COPIES
• Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys.
• To quickly set the size, first specify a value close to the desired ratio value by the numeric keys, then adjust it by
tapping .
• When you set the [Adjust to Paper Size] checkbox to , the original is enlarged or reduced with the ratio appropriate
to the original size.
To cancel the Card Shot settings:
Tap the [Off] key.
5
Place a card face down on the
document glass, and tap the [Start]
key.
► DOCUMENT GLASS (page 1-91)
You can tap the [Preview] key before scanning the original to check a preview of the scanned image.
► COPY PREVIEW (page 2-9)
6
Place a card face up on the document glass, and tap the [Start] key to scan
the reverse side.
• Copy settings cannot be changed when scanning additional pages.
• To cancel all settings:
Tap the [CA] key.
7
Tap the [Read-End] key to start copying.
If you tapped the [Preview] key in step 4, a preview will appear. Tap the [Start] key to start copying.