Operation Manual, User's Manual

4-29
FACSIMILE►BASIC TRANSMISSION METHODS
FAX DEST. CONFIRMATION MODE
This mode displays a destination confirmation message when a fax is sent to prevent accidental transmission to the
wrong destination. Set it in setting mode. If a fax is sent while this function is enabled, an address confirmation message
will appear when the [Start] key is tapped.
The message that appears will vary depending on the method used to specify the destination.
Destination specified by one-touch key/search number/global address
search
Tap the [Start] key to display all destinations in the destination confirmation screen. Check that the destinations are
correct, and tap the [Enter for send] key to start scanning of the original.
If the destination is not correct, tap the [OK] key and select the destination again.
After tapping the [Speaker] key while "Fax Dest. Confirmation Mode" is enabled, the destination cannot be specified using
the numeric keys, one-touch key, [Call Search Number] key, or [Sending History] key. However, it is possible to send through
a telephone.
• To display the destination confirmation message prior to fax transmission:
In "Settings", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Default Settings] → [Fax Dest.
Confirmation Mode].
• To check destinations other than fax
In "Settings", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Default Settings] → [Fax Dest.
Confirmation Mode] → [Apply to Addresses Other Than Fax].
• To disable fax broadcast when Fax Dest. Confirmation Mode is enabled:
In "Settings", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Send Settings] → [Disable Fax
Broadcasting].
• You can select multiple one-touch keys for contacts or groups including fax destinations.
• Before tapping the [Enter for send] key, you can change scan or other settings.