Operation Manual, User's Manual

4-27
FACSIMILE►BASIC TRANSMISSION METHODS
WHEN THE LINE IS BUSY
If the line is busy when you send a fax, transmission will be attempted again automatically after a preset interval. This
function only operates in memory transmission mode. In direct transmission mode or manual transmission mode, the
transmission will be cancelled. Wait for a brief period and then try sending the fax again.
Country Differentiation Table
To cancel transmission:
Do so from the job status screen.
► User's Manual (Touch Panel Operation)
To set the number of recall attempts and the interval between attempts when the connection cannot be established
because the line is busy, or for other reasons:
In "Settings (administrator)", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Send Settings] →
[Recall in Case of Line Busy].
When this setting is enabled, note that the machine will not attempt the call again when manual transmission or direct
transmission is used.
• Number of Times to Recall When Line is Busy
Specify how many times the machine will re-attempt the call when a communication is busy.
• Interval to Wait Between Recall Attempts (min.) When Line is Busy
The interval between recall attempts can be set.
The number of recall attempts and the interval between attempts that can be set in each country are shown in
the following table.
The number of recall attempts The interval between
attempts
United Kingdom, France, Germany, Sweden,
Italy, Spain, Netherlands, Saudi Arabia,
South Africa, Hungary, Czech Republic,
Slovakia, Poland, Greece, Russia
1 to 10
(default: 2)
any number of minutes
from 1 to 15
(default: 3)
Canada 1 to 14
(default: 2)
Australia,
New Zealand, Singapore, Thailand,
Malaysia, India, Philippines
1 to 9
(default: 2)
Hong Kong 1 to 3
(default: 2)
Taiwan 1 to 15
(default: 2)
any number of minutes
from 4 to 15
(default: 4)
Indonesia 1 to 5
(default: 2)