Operation Manual, User's Manual

7-74
SETTING MODE►SYSTEM SETTINGS
Receiving Date & Time Print
Enable this setting to have the date and time of reception printed.
Select [Inside the Received Image] or [Outside the Received Image] for the position where the date and time is printed.
When [Inside the Received Image] is selected, the date and time of reception is printed on the received image.
When [Outside the Received Image] is selected, the received image is reduced and the date and time of reception is
printed in the blank area that results.
Letter Size RX Reduce Print
When an 8-1/2" x 11" (Letter) and lager size fax is received, this function reduces the fax to A4 size.
POP3 Communication Timeout Setting
The duration of time the machine waits until stopping reception can be set from 30 to 300 seconds in increments of 30
seconds if no response is received from the mail server (POP3 server).
Reception Check Interval Setting
Specifies an interval at which the machine automatically checks the mail server (POP3 server) for received Internet
faxes. The interval can be set from 0 minutes to 8 hours in increments of 1 minute.
If 0 hours 0 minutes is specified, the machine does not automatically check the mail server for received Internet faxes.
The [Outside the Received Image] cannot be selected for the reception date and time print setting if "Auto Receive Reduce
Setting (page 7-73)" is not enabled.
When this setting is enabled, A4 size faxes are also reduced.
The machine also checks the mail server (POP3 server) for received Internet faxes when the main power is switched on.
(Except when 0 hours 0 minutes is specified.)