Operation Manual, User's Manual

1-4
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
INTERIOR, SIDE AND BACK
(1) Fusing unit
Heat is applied here to fuse the transferred image onto
the paper.
(2) LAN connector
Connect the LAN cable to this connector when the
machine is used on a network.
Use a shielded LAN cable.
(3) USB port (B type)
The machine does not use this connector.
(4) USB port (A type)
This is used to connect a USB device such as a USB
memory device to the machine.
Supports USB 2.0 (Hi-Speed).
(5) Toner cartridge
This cartridge contains toner.
When the toner in a cartridge runs out, replace with new
one.
► REPLACEMENT OF TONER CARTRIDGE (page
1-125)
(6) Waste toner box
This container collects excess toner that remains after
printing.
► REPLACING THE WASTE TONER BOX (page
1-128)
(7) Handle
Grasp it when moving the machine.
(8) Side cover
Open this cover to remove a paper misfeed.
(9) Extension phone socket (TEL)*
When the fax function of the machine is used, an
extension phone can be connected to this socket.
(10) Telephone line socket (LINE)*
When the fax function of the machine is used, the
telephone line is connected to this socket.
(11) The main power switch
Use this switch to turn on the power for the machine.
When using the fax, always keep this switch in the " "
position.
►
TURNING ON THE POWER (page 1-8)
(12) Power plug
*Optional
(6) (8) (6)(10)(9) (11) (12)
(1) (2) (3)
(7)(5)
(4)
The fusing unit is hot. Take care not to burn yourself
when removing a misfeed.