Operation Manual, User's Manual

4-40
FACSIMILE►BASIC TRANSMISSION METHODS
• Prohibit Broadcast
In "Settings (administrator)", select [
System Settings ] → [Image Send Settings] → [Scan Settings] → [Default Settings] →
[Disable Fax Broadcasting].
• Sending the same image sent in Fax mode
In "Settings (administrator)", select [
System Settings ] → [Image Send Settings] → [Scan Settings] → [Default Settings] →
[Sending the same image sent in Fax mode].
Enable this when sending by broadcast transmission in Fax and other modes and you want to send the same image in all
modes. If this function is disabled, an image specified with
each Scan Setting is sent to E-mail, FTP, Desktop, and Network Folder. When an Internet Fax address is included in the
addresses, the same image is sent regardless of this setting.
1
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT F
EEDER (page 1-107)
► DOCUMENT GLASS (page 1-109)
This is a single transmission operation, and therefore originals cannot be scanned in succession from both the
document feeder and the document glass.
2
Specify all destinations.
• Entering a destination number using the numeric keys ►page 4-12
• Retrieving a destination from an address book ►page 4-14
• Using a search number to retrieve a destination ►page 4-17
• Retrieving a destination from a global address book ►page 4-18
• Using a transmission log to resend ►page 4-20
After entering a destination using the numeric keys, if you wish to enter another destination using the numeric keys, tap
before entering the next destination.
can be omitted before or after a destination entered using a one-touch key.
If "Be sure to press Next Address Key ([+]) before selecting the next address." is enabled in setting mode, tap before
specifying the next destination.
3
Tap the [All Destinations] key.
CA
Preview
Start
Original
A4
Address
AAA AAA
Address Book Sending History Direct Entry
Detail
1
+