SETUP MANUAL

ManualsBrandsSharp ManualsDigital Copier / PrinterMXM2630

MOUNTING PRECAUTIONS

• This product is for indoor use.

• A mounting bracket compliant with VESA specifications is

required.

• Since the monitor is heavy, consult your dealer before

installing, removing or moving the monitor.

• Mounting the monitor on the wall requires special expertise

and the work must be performed by an authorized SHARP

dealer. You should never attempt to perform any of this

work yourself. Our company will bear no responsibility

for accidents or injuries caused by improper mounting or

mishandling.

• Use the monitor with the surface perpendicular to a level

surface.

• When moving the monitor, be sure to hold the handles or

the parts marked by

below. Do not grasp the screen

or tray. This may cause product damage, failure, or injury.

[PN-86HC1]

[PN-75HC1]

[PN-65HC1]

• This monitor should be used at an ambient temperature

between 41°F (5°C) and 95°F (35°C). Provide enough

space around the monitor to prevent heat from

accumulating inside.

Unit: inch [mm]

7-7/8 [200]

2 [50]

[50]

1-7/16 [35]

• If it is difficult to provide sufficient space for any reason

such as the installation of the monitor inside a housing or

of several units side-by-side, or if the ambient temperature

may be outside of the range of 41°F (5°C) to 95°F (35°C),

install a fan or take other measures to keep the ambient

temperature within the required range.

• Temperature condition may change when using the monitor

together with the optional equipments recommended by

SHARP. In such cases, please check the temperature

condition specified by the optional equipments.

• Do not block any ventilation openings. If the temperature

inside the monitor rises, this could lead to a malfunction.

• Do not place the monitor on a device which generates heat.

• Do not use the product in locations where the unit is

exposed to direct sunlight or other strong light. Since this

product operates with infrared rays, such light may cause a

malfunction.

• When using multiple monitors closely, be sure the infrared

transmitter/receiver does not affect the other ones.