Operation Manual, Software Setup Guide
7
Custom installation
Custom install is used to make detailed configuration.
1
Click the [Custom installation] button.
Refer to "Installing the printer driver / PC-Fax driver
(common procedure) (page 4)" on how to display the
"Choose an installation method" screen.
2
Select how your MFP will be connected.
Specify the MFP IP address
When the machine cannot be found because it is not powered on or otherwise, installation is possible by entering the
name (host name) or IP address of the machine.
Search for MFP
Find the machine connected to the network and install the driver. The procedure for finding the machine is the same as
in "Standard installation", but you can also configure advanced settings.
Use an IPP or IPPS port
Using the IPP function, even when the printer is placed remotely, it can be used as a fax machine and high quality print is
possible. By using the SSL function at the same time, encrypted data can be sent.
Use an existing port
Install the driver using an existing port on your computer. You can also create a new port.
Register the driver to OS (Operating System)
Even if the printer is not connected to LAN, it is possible to install the printer driver.
Page 8
Page 10
Page 11
Page 12
Page 13
Table of contents
Windows / Select the software to be installed
Installing the printer driver / PC-Fax driver (common procedure)