Operation Manual, User's Manual

3-94
PRINTER►APPENDIX
Print settings
You can print from an application that supports Google Cloud Print.
Functions that can be enabled from the application are as follows.
*1 This item cannot be used in MX-M2630/M3050/M3550/M4050/M5050/M6050.
*2 Can be used when an inner finisher, finisher, or saddle stitch finisher is installed.
Item Description
2-Sided Print None, Book, Tablet
Orientation Portrait, Landscape
Copies 1-999
Resolution 600x600, 1200x1200*
1
Fit Page On, Off
Page Select -
Paper Size
A4, A3, A5, B4, B5, A3W, Ledger, Legal, Letter, Invoice, Executive, Foolscap, 8 1/2 x
13 2/5, 216 x 343, 8K, 16K
Paper Tray Varies depending on the machine configuration
Output Tray Centre Tray, Right Tray, Upper Tray, Middle Tray, Lower Tray
Print per Unit On, Off
Staple*
2
On, Off
• Google Cloud Print uses the XMPP (5222) port or HTTPS (443) port for communication.
Check the settings for restriction of access from the Internet, the machine administrator password, and mDNS as needed.
• In some cases the print quality using Google Cloud Print may not be the same as the print quality using other print
methods (printer driver, etc.).
The content of some files may not print correctly or may not be printable.
• In some countries and regions, the machine may not be able to use some or all of the Google Cloud Print connection
functions.
• In some network environments, the machine may not be able to use the Google Cloud Print connection functions, or
printing may be slow or may stop before the job is completed.
• Sharp Corporation does not in any way guarantee the continuity or stability of Google Cloud Print connection functions.
With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss
due to the customer’s use of these functions.