MX-M260N/M260/M310N/M310 Operation-Manual Online-Manual GB

6
TROUBLESHOOTING
71
CONTENTS
Printing does not take place
(part 4)
Checking the printer driver
Is your machine selected correctly in the current
application for the print job?
Select the printer driver of the machine in the print settings
window of the application.
If the printer drivers appear as icons, click the icon of the
machine.
If the printer drivers are selected from a pull-down menu,
select the printer driver of the machine from the menu.
Windows: Basic printing
Macintosh: Basic printing
Points to check in Windows
Has the printer driver been installed properly?
Follow the steps below to make sure that the printer driver is
installed correctly.
1 Click the [Start] button and select [Control Panel] and
then select [Printer].
On Windows 2000, click the "Start" button, select
"Settings" and then click "Printers".
On Windows XP/Server 2003, click the "Start" button and
then click "Printers and Faxes".
2 Check if the "SHARP MX-xxxx" printer driver icon is
shown.
If the printer icon of the machine does not appear, the printer
driver is not installed correctly. Follow the instructions in the
software setup guide for network printer to correctly install the
printer driver.
Is the port configured correctly?
It is possible that there is a problem with the port
configuration, for example another printer driver may be
using the port. Open the printer driver properties and
correctly configure the port that you are using.
See the software setup guide for network printer.