MX-M260N/M260/M310N/M310 Operation-Manual Online-Manual GB

1
PRINTING FROM WINDOWS
22
CONTENTS
Stapling printed pages (when a finisher is installed)
When a finisher is installed, printed pages can be stapled.
To use this feature, open the printer driver setup screen and select it in the "Finishing"
field of the "Main" tab.
See Basic printing for details on how to open the printer driver.
When a finisher is installed
The following example shows how portrait oriented pages are stapled together.
The maximum number of sheets that can be stapled is 50. (up to 30 sheets when the paper size is B4, Foolscap, or larger).
Paper sizes that can be used for staple printing are Ledger, Letter, Letter-R, Legal, A3, A4, A4R, B4, B5, B5R, and Foolscap.
Paper types that can be used for staple printing are Plain, Letter Head, Recycled, Color, Thin and Heavy (only front cover and
back cover).
Staple printing is not possible when the ROPM function is disabled. (See "CONFIGURING THE PRINTER DRIVER" in the
software setup guide.)
If the finisher is disabled in the system settings (administrator), the staple function cannot be used "DISABLING OF STAPLER" in
the "SYSTEM SETTINGS (ADMINISTRATOR)" in the operation manual.)
Stapling is not possible if disabled in the system settings (administrator) (see "DISABLING OF STAPLER" in the "SYSTEM
SETTINGS (ADMINISTRATOR)" in the operation manual).
The staple function cannot be used in combination with the "No offset" function.
Print data Printing result
If paper is oriented horizontally (Letter-R, A4R, A3, etc), the pages are stapled in the upper right-hand corner.
Note
Note
The pages are
stapled in the
upper left-hand
corner.