MX-M850/950/1100 Operation-Manual Maintenance-Guide GB

4
CLEANING THE BYPASS FEED ROLLER
If you find that postcards and other heavy media frequently misfeed in the bypass tray, clean the bypass feed roller.
To clean the bypass feed roller, wipe the surface of the roller with a soft cloth moistened with water or a neutral detergent.
X MX-MFX1
1
Remove the paper.
2
Remove the cover.
While pushing the cover to the
left, pull it forward.
3
Clean the roller.
After cleaning the roller, replace
the cover to its original position.
4
Set the paper.
X MX-MFX2
1
Press the operation button and remove
the paper.
After the button is pressed, the
paper table will descend. While
the paper tray descends, the
operation button indicator will
blink. After the paper tray
finishes descending, the
indicator will light solidly.
Do not remove the paper until
the indicator light solidly.
2
Remove the cover.
While pushing the cover up, pull
it forward.
3
Clean the roller.
After cleaning the roller, replace
the cover to its original position.
4
Set the paper and press the operation
button.
After the button is pressed, the
paper table will rise. While the
paper tray rises, the operation
button indicator will blink. After
the paper tray finishes rising, the
indicator will light solidly.